Wieland ZENOTEC FIRE CUBE

Characteristics

Function:

sintering

Applications:

for dental laboratories

Designed for:

ceramic

Other characteristics:

bench-top

Temperature range:

Min.: 0 °C (32 °F)

Max.: 1,500 °C (2,732 °F)

Sintering Zenotec Fire Cube

Standard program Zenostar MT/T/MO 1500°C/2h (2732°F/2h):

Temperature 1 [°C] / [°F] Temperature 2 [°C] / [°F] Heating rate [°C/h] / [°F/h] Holding time [h]

Heating phase 20 / 68 900 / 1652 600 / 1112 –

Holding phase 900 / 1652 900 / 1652 – 0.5

Heating phase 900 / 1652 1500 / 2732 200 / 392 –

Holding phase 1500 / 2732 1500 / 2732 – 2

Cooling phase 1500 / 2732 900 / 1652 600 / 1112 –

Cooling phase 900 / 1652 300 / 572 500 / 9

For the sintering process in the Zenotec high-temperature furnaces, the following points should be observed:

If a standard program is used, it is recommended to sinter the restorations on a sintering support base plate under a highpurity

Al2O3 cover. This arrangement helps prevent deformation and discoloration from occurring in the restoration. All

standard sintering programs are matched to this configuration.

If a fast sintering program is used, only the sintering support base plate – without the cover – must be used. Fast sintering

is only suitable for Zenostar T/MO single-tooth restorations.

Check sintering auxiliaries regularly to make sure that they are clean and work properly.

MODEL YEAR : 2023