Nidek Multifunction ME-1500 Lens Edger

Description

Nidek Multifunction ME-1500 Lens Edger

Specification:

Grinding system Patternless

Mode Beveling (automatic, guided, frame curve)

Partial beveling (automatic, guided, frame curve)

Flat edging

Polishing

Chamfering (with, without polish)

Special safety beveling

Facet

Grooving (automatic, guided)

Partial grooving

Drilling

Design cut

High base curve beveling

Step beveling

Partial step processing

Mini beveling (0.4 to 0.7 mm) (0.1 mm increments)

Custom beveling

Frame changing

Soft processing

_____________________________________________________________________

Setting range

FPD 30.00 to 99.50 mm (0.01 mm increments)

PD 30.00 to 99.50 mm (0.01 mm increments)

1/2PD 15.00 to 49.75 mm (0.01 mm increments)

Optical center height 0 to 15.0 mm (0.1 mm increments)

Size adjustment 0 to ±9.95 mm (0.01 mm increments)

_____________________________________________________________________

Minimum grinding size

Flat edging ø32.0 x 19.5 mm / with nano cup (optional) ø20.0 x 15.5 mm

Bevel edging ø33.0 x 21.0 mm / with nano cup (optional) ø21.0 x 16.5 mm

Safety beveling (flat) ø34.5 x 21.5 mm / with nano cup (optional) ø23.0 x 18.5 mm

Safety beveling (bevel) ø35.5 x 22.5 mm / with nano cup (optional) ø24.0 x 19.5 mm

High base curve beveling ø39.0 x 26.0 mm / with nano cup (optional) ø27.0 x 22.5 mm

Grooving ø32.0 x 19.5 mm / with nano cup (optional) ø20.0 x 15.5 mm

_____________________________________________________________________

Drilling

Hole diameter ø0.80 to 10.00 mm (0.01 mm increments)

Hole depth 6.0 mm or less

Range for hole milling ø33.0 to 70.0 mm from lens rotation axis

Direction for hole milling Automatic/manual tilting 0 to 30°

Slotted hole width ø0.80 to 10.00 mm (0.01 mm increments)

Slotted hole depth 6.0 mm or less

Slotted hole length 20.8 mm or less

_____________________________________________________________________

Wheel configuration Type PLB-8S, PLB-2R8S

_____________________________________________________________________

Water supply system Pump circulation or direct connection to tap water

_____________________________________________________________________

Interface RS-232C – 3 ports

1 port for connection with a computer or blocker

1 port for connection with a barcode scanner

1 port for connection with a frame tracer

USB – 1 port

LAN – 1 port

_____________________________________________________________________

Power supply 100 to 120 V AC / 200 to 240 V AC, 50/60 Hz

_____________________________________________________________________

Power consumption 1.5 kVA

_____________________________________________________________________

Dimensions/mass 600 (W) x 496 (D) x 355 (H) mm / 52 kg

23.6 (W) x 19.5 (D) x 14.0 (H)” / 115 lbs.

_____________________________________________________________________

Standard accessories Pliable cup, Pliable cup for high base curve lenses, Double-coated adhesive pad,

Stylus pen, Pliable cup remover, Compound kit for polishing wheel, Adapter set,

Flat lens, Dressing stick for finishing wheel,

Dressing stick for glass roughing wheel (type PLB-2R8S),

Hexagonal screwdriver, Hexagonal wrench, RMU/LMU calibration jig, Wrench,

Tray, Drill bit, Power cord, Ferrite core

_____________________________________________________________________

Optional accessories Barcode scanner, Internal barcode scanner, Circular pump tank,

Mini cup set, Nano cup kit, USB flash drive, Drill bit (ø1.0, 1.2, 1.6)